Low Reflection Broadband MMCX RF Connector Gold Plated RoHs Approval
Product Description :
The MMCX series is also called MicroMateTM. It is one of the smallest RF connector line and was developed in the 1990's . MMCX is a micro-miniature connector series with a lock - snap mechanism allowing for 360 degrees rotation enabling flexibility in PCB layouts . MMCX connectors conform to the European CECC 22000 specification.
The micromate family of products is a 6 GHz 50 Ω interconnect system . A range of connectors are available including surface mount , edge card , and cable connectors .
Features & Benefits :
| • |
Broadband performance with low reflection DC to 6 GHz, providing a high-quality solution at a low cost |
| • |
Quick connect/disconnect snap-on mating reduces installation time |
| • |
Conforms to European CECC 22000 specifications |
| • |
Available in straight and right angle plugs and printed circuit board connectors |
Applications :
| • |
Antennas |
• |
Base stations |
• |
Broadband communications |
| • |
Cable assemblies |
• |
Components |
• |
GPS |
| • |
Instrumentation |
• |
PCMCIA cards |
• |
Radio boards |
| • |
Satcom |
• |
Telecom |
|
|
MMCX Specifications :
| Electrical |
CECC 22000 |
|
| Impedance |
|
50 ohms |
| Frequency Range |
|
DC - 6 GHz |
| VSWR |
4.4.1 |
1.15 max. @ DC - 4 GHz |
| 1.40 max. @ 4 - 6 GHz |
| RF-Leakage |
4.4.8 |
60 dB minimum @ 1 GHz (flexible cable)
70 dB minimum @ 1 GHz (semi-rigid cable) |
| Voltage Rating (at sea level) |
|
≤ 170 Vrms (depending on cable) |
| Contact Resistance |
4.4.2 |
center contact: ≤ 10 mohms |
| |
4.4.3 |
outer contact: ≤ 5 mohms |
| Insulation Resistance |
4.4.4 |
1,000 Mohms minimum |
| Dielectric Withstanding Voltage |
4.4.5 |
500 Vrms (at sea level) |
| Mechanical |
CECC 22000 |
|
| Mating |
|
Snap-on coupling |
| Contact Captivation |
4.5.2 |
2.3 lbs |
| Engagement Force |
4.5.4 |
≤ 3.4 lbs (15N) |
| Disengagement Force |
4.5.4 |
≥ 1.4 lbs (6N) |
| Durability (matings) |
4.7.1 |
500 cycles minimum |
| Environmental |
CECC 22000 |
Test Requirement |
| Temperature Range |
4.6.5 |
-55° C to +155° C |
| Thermal Shock |
4.6.7 |
MIL-STD-202, method 107, cond. F |
| Moisture Resistance |
4.6.6 |
MIL-STD-202, method 106 |
| Corrosion |
4.6.10 |
MIL-STD-202, method 101, cond. B |
| Vibration |
4.6.3 |
3 cycles, 3 opposite directions, 10 - 150 Hz
10 - 60 Hz: 0.75mm/0.03in., 60-150 Hz: 10 G
|
| Mechanical Shock |
4.6.4 |
MIL-STD-202, method 213, cond. B |
| Humidity |
4.6.6 |
MIL-STD-202, method 103, cond. B |
| Material |
CECC 22000 |
Test Requirement |
| Body and Outer Contacts |
|
Brass, nickel or gold plated |
| |
|
|
| Female Contact |
|
Beryllium copper or phosphor bronze, gold plated |
| Crimp Ferrule |
|
Copper or brass, nickel plated |
| Insulator |
|
LCP, PTFE or PFA |
Note: These characteristics are typical but may not apply to all connectors.
About us :
1. We specialize in RF connectors , RF cable assembly and RF connectors . The main products we manufacture are RF connectors, MCX , MMCX , SMA , SMB , N , RF connector cable Our products are sold to different areas of overseas markets .
2. We have passed ISO9001 quality certification and our products
antenna connector comply with RoHS requirement .
3. We have professional technical development team . we have advanced NC processing equipment and precise test equipment .
4. Our principle is to meet customers’ requirement by good service and high-quality products . The prices of products….. are very competitive and reasonable .
5. We are committed to providing the best products….. to our customers with quickest delivery and best price .
Quality is essential to both of us, we believe that High quality, Low price,Mutual benefit will be good basis of our cooperation!!!
